The Google Home speaker update is firmware 3.79.550760, and it is heading to the original Google Home, Home Mini, Nest Mini and Nest Audio. Google says it improves streaming, volume, Wi-Fi setup and smart home controls, but it has not published detailed notes. Whether you can get it today depends on your speaker’s preview status.
Here are the facts worth knowing before you go hunting for it in the Google Home app.
- Firmware version: 3.79.550760
- Speakers: Google Home, Home Mini, Nest Mini, Nest Audio
- Reported by Droid Life on October 14 and Android Authority on October 15, 2026
- You cannot force the update from the app
- Google has not given a full rollout date
What the Google Home speaker update changes
Google lists five areas in its changelog, as relayed by Droid Life. The wording is vague, so the table below pairs each line with what it probably means in daily use.
| Changelog line | What it likely means for you |
|---|---|
| Audio and media streaming and volume improvements | Fewer dropouts when casting music, and steadier volume control |
| Setup and connectivity improvements on Wi-Fi issues | Easier pairing, and better recovery when your router drops the speaker |
| Google Assistant entry experience improvements | Smoother voice wake-up. Android Authority says this probably refers to Gemini |
| Smart home control improvements | More reliable commands to lights, plugs and thermostats |
| Overall performance and stability improvements | Fewer random reboots or “something went wrong” replies |
Treat the right-hand column as informed guesses. Google has not confirmed specific fixes, so test your own trouble spots after the update lands.
Which speakers get the update
The firmware targets four older speakers. These are the models named in both reports.
- Google Home (the original 2016 speaker)
- Google Home Mini
- Google Nest Mini
- Google Nest Audio
These speakers have been around for years. A firmware refresh is welcome news if yours still sits in a kitchen or bedroom and works fine.
Why you may not see it yet
The two reports differ on rollout. Droid Life describes a staged release, while Android Authority says testing is limited to people in the Google Home Preview Program.
Both can be true at once: a preview group gets it first, then everyone else. Google has not confirmed when the wider release starts, so patience is the honest advice here.
How to check your speaker’s firmware
You cannot push this update by hand, but you can confirm whether your speaker is eligible. Follow these steps in the Google Home app.
- Tap the speaker, then open its settings (the gear icon).
- Choose Device information.
- Look for Preview program and check whether the speaker is enrolled.
- Compare the firmware number with 3.79.550760.
Eligible speakers update on their own, usually while idle and connected to Wi-Fi. Keep the speaker powered and on your home network, and you are done.
Gemini for Home is a separate update
Do not confuse this firmware with the October Gemini for Home update. According to Android Authority, that one improves conversations, voice commands, weather replies and device controls inside the app.
If Gemini on your speakers feels new, our guide to the Google Assistant shutdown explains what you lose and gain. Planning a bigger smart home refresh? Our look at the next-gen Google TV Streamer leak shows where Google’s hardware may be heading.
What to try while you wait if your speaker drops Wi-Fi
The update may help, but most speaker problems come from the home network. Three quick fixes cost nothing and often solve it.
- Move the speaker away from microwaves, baby monitors and thick walls.
- Restart your router, then power-cycle the speaker by unplugging it for 30 seconds.
- Put the speaker on the 2.4 GHz band if your router splits its bands.
If none of that helps after the firmware arrives, a factory reset and fresh setup is the last step before replacing the hardware.
Frequently Asked Questions
Can I force the Google Home speaker update?
No. Reports say you cannot trigger it manually. Eligible speakers install it automatically when it reaches them.
Is the update safe to install on an old Nest Mini?
Google pushed it to the Nest Mini on purpose, and nothing in the reports mentions problems. Still, it is a preview-stage release, so expect the odd glitch.
How do I know if my speaker already has it?
Open the Google Home app, select the speaker, and look at Device information. If the firmware reads 3.79.550760, you have it.
Does this add Gemini to my old speaker?
Not clearly. The changelog mentions the “Assistant entry experience,” which Android Authority reads as Gemini-related, but Google has not said so.
Worth waiting for, not worth chasing
This is a quiet maintenance release, and that is fine. If your speaker already works, do nothing and let it update itself. If you have Wi-Fi drops or flaky voice commands, check the Preview program setting and see whether the firmware fixes them before you buy a replacement.
Leave a Reply